DIY tutorials

What's in your kit?

• Phone case

  Choose from seven vibin’ colours, from Acid Green to Cosmic Black

• 5 DRMZ®

  Strong adhesive decorations that make your phone cover pop.

• Charms & bracelets

  Add piercing rings and charms, or strap holders and phone bracelets to make your design even more unique!

• DRMZ®

  When applying the DMRZ®, ensure the case surface is clean, dry, and free of moisture or grease. Remove the protective back and press DMRZ® on firmly. Done!

• Piercing

  Unscrew the piercing ring. From inside your case, insert the screw through the hole at the bottom so it points outward. Secure the piercing ring onto the screw from the outside.

• Charms

  Gently open up and remove o-ring from charm, then insert the charm through the advanced o-ring. Carefully twist the advanced o-ring into the holder on the case.

• Phone bracelet

  Position the strap holder inside your phone case and pull its hanger through the charging port opening. With the strap holder in place, put your phone in the case and attach your phone bracelet to the holder.

• Assemble Phone Bracelet Beads

  See the video for instruction how to assemble your phone bracelet with beads.

• Add strap holder

  Place your strap holder on the inside of your phone case, and pull the hanger through the charger hole of your case.

• Place your phone in your case

  With the strap holder in your case, place your phone in the case

• Attach phone bracelet

  With the strap holder attached to your case, hang your phone bracelet or other decorations on your strap holder.

• Assemble Phone Bracelet

  See the video for instruction how to assemble your phone bracelet with chain links.

• Add strap holder

  Place your strap holder on the inside of your phone case, and pull the hanger through the charger hole of your case.

• Place your phone in your case

  With the strap holder in your case, place your phone in the case

• Attach phone bracelet

  With the strap holder attached to your case, hang your phone bracelet or other decorations on your strap holder.

What's in your kit?

• Laptop case 14"

  Select among four colors: purple with pink inside, white with pink inside, black with green inside, and pink with purple inside.

• 5 DRMZ

  Fabric decorations that make your laptop case unique!

• Crossbody strap

  Choose between our three different shoulder straps in black, pink, and blue.

• Bag Charm

  Attach Bag Charms to make your case even more unique.

• Attach DRMZ®

  Make sure the surface is clean, flat, and completely dry. Peel off the backing, press your Soft DRMZ® firmly into place, and you’re all set!

  For extra durability, place a thin cloth on top and iron on medium heat for 30 seconds, then let it cool.

• Attach the crossbody strap

  Choose from our three different shoulder straps. The laptop case has a loop on each side where you attach the strap.

• Add Bag Charms

  Give your laptop case that extra touch by adding a bag charm. Voilà – now you have a laptop case that is truly unique!

What's in your kit?

• Beanie, Trapper hat, cap, or bucket hat

  Beanies come in black, white and grey, and caps come in pink and black. Trapper hats and bucket hats are black.

• DRMZ®

  Fabric decorations that make your hat unique!

• Attach DRMZ®

  Make sure the surface is clean, flat, and completely dry. Peel off the backing, press your Soft DRMZ® firmly into place, and you’re all set!

  For extra durability, place a thin cloth on top and iron on medium heat for 30 seconds, then let it cool. Washing the product often? Turn it inside out, iron from the back, and add a few quick stitches to keep your Soft DRMZ® fresh and secure.

• Attach charms (cap & bucket hat)

  You can attach charms to the metal eyelets on the cap and bucket hat. The cap has 3 metal eyelets and the bucket hat has 4. You’ll need a Charm Clasp for each charm you want to hang.

What's in your kit?

• Backpack

  Select among five colors: blue, pink, purple, black and off-white.

• 5 DRMZ®

  Fabric decorations that make your backpack unique!

• Charms, bag charms & chains

  Hang charms, bag charms or chains on your backpack, to make it even more unique!

• Attach DRMZ®

  Make sure the surface is clean, flat, and completely dry. Peel off the backing, press your Soft DRMZ® firmly into place, and you’re all set!

  For extra durability, place a thin cloth on top and iron on medium heat for 30 seconds, then let it cool. Washing the product often? Turn it inside out, iron from the back, and add a few quick stitches to keep your Soft DRMZ® fresh and secure.

• Add charms

  Open and remove the o-ring from the charm. Then insert the charm through the advanced o-ring. Carefully twist the advanced o-ring into the backpack’s attachment points.

What's in your kit?

• 1 bracelet or necklace thread

  A flexy nylon thread to add all your beads ‘n bling to

• 1 charm

  Super-cute accessory of your choice

• Essential beads

• Measure thread

  Start by using your beadboard to measure the desired length of thread (bracelet is 13-20cm/ necklace is 41-56cm).

• Thread beads

  Lay out your beads, charm, and logo in a design you vibe with, then feed the nylon thread through them.

• Tie a knot

  Finish your jewelry with a bead with a large hole to slide the entire knot into it. It also helps to stretch the nylon thread before tying to create tension. Now, tie the knot in two steps (image below). Voilà!

What's in your kit?

• 1 bracelet or necklace wire

  A flexy nylon thread to add all your beads ‘n bling to

• 2 connectors

  Teeny bead-stoppers that connect your clasp to your necklace/bracelet

• 1 clasp

  Stylish fastener that holds your creation together.

• 1 charm

  Phone candy that dangles and dazzles

• Essential beads

• Measure wire

  Start by using your beadboard to measure the desired length of thread (bracelet is 13-20cm/ necklace is 41-56cm).

• Thread beads

  Lay out your beads, charm, and logo in a design you vibe with, then feed the wire through them

• Add clasps, o-rings, and connectors

  Thread one end of jewellery wire through a connector and then through a clasp. then thread wire through the same connector as before before pulling the wire through.

  Then, follow the three steps to enclose the beads. repeat on the other end of the wire with an o-ring instead of a clasp.

  Finally, gently pull the wire and clasp to test the closure's strength, then trim excess wire - however, do keep some length so you can and weave it into the nearest beads.